MJ Engineering has partnered with a commercial cleaning product manufacturer. The result is 2 independent cells. The first is a de-palletizing cell. This particular cell requires an operator who is responsible for putting the pallet of bottles onto a conveyor.
Once on the conveyor, the operator walks around and takes off all of the plastic wraps, and uses a foot pedal to move the pallet into the on-deck position. When the robot is ready the pallet is moved into the unloading zone by the conveyor. Once in position, the robot picks the bottles row by row and places them on a smooth top conveyor where they are transferred one by one onto a conveyor that leads to the fill station. When the robot completes the entire layer it rotates the end of the arm tool and picks up the cardboard tier sheet and disposes it down a gravity ramp and moves on to the next layer.
While the robot is working on the current pallet the operator can be preparing the next pallet. Once all bottles/layers have been completed the robot will pull the next pallet into position and the process starts anew.
The 2nd cell is further down the line. The filled bottles come to the straw insertion station where the straws are pushed into the bottlenecks. MJ has a bowl feeder that presents straws 1 by 1 to a rotation table and where collaborative robots pick the straws off of the rotating table and move them into the funnel that aligns the straw with the bottle. Once the straw is dropped we have a pusher that comes down from above and pushes the straw into its locked position and then the bottles are moved out.
This cell features a lot of moving parts. There are multiple 3D printed parts used for all kinds of things of all kinds of different complexities. The dual mirroring collaborative robots feature 3D printed gripper fingers which help grab the straws. The funnels and the centering devices are also 3D printed. The centering device helps us center the bottles and the straw at the same time. Finally, the pushers are also 3D printed and are responsible for setting the straw into the bottle.
Do you have a project that would require complex parts or complex design? We can handle it. Robotic assembly and palletizing are two of the many areas we can help. Contact us today and let us see if we can help you.